RF Conducted Immunity Test Systems


RF Conducted Immunity Generator with a 75 watt power amplifier with a frequency range of 10 kHz - 250 MHz. Includes three channel power meter with two channels used for forward power and signal level monitoring, signal generator (9 kHz - 1.2 GHz), directional coupler and emcware® control software with custom test editor.
Call Me Download Spec Sheet
Login to see pricing information.

Complete Testing Solutions to the following standards:
• IEC 61000-4-6:2013
• IEC 60601-1-2:2014
• EN 61000-6-1:2007
• EN 61000-6-2:2005
• EN 55024:2010
The Model CI00250A is a fully self-contained state of the art system designed to test RF Conducted Immunity. The CI00250A contains all the instruments needed to perform conducted immunity testing to the IEC 61000-4-6 specification. The system contains a signal generator, 3 channel power meter, 75W minimum AR amplifier 10kHz to 250MHz, and emcware® control software. Everything is contained in a single housing, which eliminates setup issues. This system will have the versatility needed for every test laboratory and equipment manufacturer. The RF amplifier and the signal generator can be used independently of the system. If special needs arise or standards were to change a larger amplifier can be connected to the system. The use of spectrum analyzers and monitoring equipment may also be controlled by the software. Due to changes to previously mentioned standards, Option 1 is now required to comply with amplifier linearity testing.

The export classification for this equipment is EAR99. These commodities, technology or software are controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.