RF Test Accessories and EMC Test Accessories

AS03009

1 MHz –3 GHz System, Automotive Conducted Immunity
Call Me
Login to see pricing information.

The AS03009 AR System has been specially designed to perform Automotive Conducted Immunity testing over the frequency range of 1MHz–3GHz at test levels of up to 200mA.

The signal generation, power and current monitoring, and control equipment are housed in a ventilated, 30U (52.5” panel height), rack cabinet. All internal RF and control cabling and AC power distribution is included. RF connections (signal out, RF sense in) are through Type N bulkhead connectors located on the side of the control rack approximately 80cm from the floor. This connector location allows the control rack to be placed next to the required conductive table with the RF connections even with the table surface.

This export classification for this system is EAR99. These commodities, technology or software are controlled for export in accordance with the U.S. Export Administration Regulations. Diversion contrary to U.S. law is prohibited.

The AS03009 system is provided without the vector network analyzer (VNA) necessary to perform the calibration (insertion loss) measurements on the tubular wave coupler. The AS03009M1 is provided with the VNA.

View the full Spec Sheet for this product in PDF format.