RF Test System Controllers

RF Test System Controllers

(Prices effective July 1, 2018)

model description price*
SC Switch Control Platform SC2000, SCX2000, SCP2000 - SCM Series Modules designed for a multitude of switching applications in RF systems. login
SC1000 Controller designed for multi-ampilifier/multi-load applications where reverse power measurement is not necessary login
SC1000M1 Controller designed for multi-amplifier/multi-load applications with forward and reverse power measurement and emissions feedback login
SC1000M2 Controller accommodates forward power measurements and higher power/high frequency amplifier and load combinations where switching and cable losses need to be minimized login
SC1000M3 Controller accommodates forward and reverse power measurement and higher power/higher frequency amplifier and load combinations where switching and cable losses need to be minimized (Other variation of controllers without switches or with lower priced switches are available - Contact factory) login
SC1000M4 Controller accommodates forward and reverse power measurement and higher power/higher frequency (up to 40 GHz) amplifier and load combinations where switching and cable losses need to be minimized. login

* Please login to see prices.

The Models SC1000, M1, M2 and M3 are rack mountable(48.3W x 13.34H x 45.75D cm) or stand alone, RF System controllers designed to facilitate the concurrent use of up to three signal generators, four power amplifiers, four directional couplers and four different RF loads for broadband RF testing DC-40 GHz. RS-232, IEEE-488 and/or manual control. In combination with our SW1006 EMC test software they form the Brainlink? System.