As an essential business, AR is continuing to operate and provide our customers with the service and support they need during this time. We take the health and safety of our employees very seriously and have additional measures in place to maintain a safe working environment.

RF Test System Controllers

RF Test System Controllers

model description
SC2000 RF switch control platform base unit.
SCP2000 The SCP2000 module slots are populated to provide drop-in replacement of the Model SC1000 and any of its associated modifications (M1–M5).
SCP2000M1 Controller designed for multi-amplifier/multi-load applications with forward and reverse power measurement and emissions feedback.
SCP2000M2 Controller accommodates forward power measurement and higher power/higher frequency amplifier and load combinations where switching and cable losses need to be minimized.
SCP2000M3 Controller accommodates forward and reverse power measurement and higher power/higher frequency amplifier and load combinations where switching and cable losses need to be minimized.
SCP2000M4 Controller accommodates forward and reverse power measurement and higher power/higher frequency (up to 40 GHz) amplifier and load combinations where switching and cable losses need to be minimized.
SCP2000M5 Controller accommodates forward and reverse power measurement, higher power/higher frequency amplifier and load combinations where switching and cable losses need to be minimized, and emissions feedback.
SCX2000 RF switch control platform expansion unit. The SCX2000 does not have a control panel or remote control ports and therefore must be connected to a Model SC2000 for local or remote control. The SCX2000 has five (5) user configurable module slots on the rear panel.

The Models SCP2000, M1, M2, M3, M4 and M5 are rack mountable or stand alone. These RF system controllers are designed to facilitate the concurrent use of up to three signal generators, four power amplifiers, four directional couplers, a spectrum analyzer or receiver and four different RF loads for broadband RF testing up to 40 GHz, USB, GPIB, RS-232, IEEE-488 and/or manual control. In combination with our emcware test software, they form the Brainlink™ System.