As an essential business, AR is continuing to operate and provide our customers with the service and support they need during this time. We take the health and safety of our employees very seriously and have additional measures in place to maintain a safe working environment.

RF Test Accessories

Conducted Immunity Test System Accessories

SC1000 The SC1000s are versatile RF test system controllers (signal routing switch matrices) that coordinate multiple pieces of equipment in a single test set-up. This alleviates the need to change cable feeds due to frequency limitations of individual pieces. The SC1000s can be used as RF switch matrices and can also be controlled by SW888A and SW1006 software. Designed for the use of up to three signal generators, four power amplifiers, four directional couplers, four different RF loads, and a spectrum analyzer or receiver for broadband RF testing, the SC system controllers operate in a frequency range from dc to 40 GHz via RS-232, IEEE-488 and/or by manual control via the front panel.

System interlock capability is provided by sensing a switch closure. Additionally, a switchable positive 12 VDC signal and four open collector outputs are supplied to allow the use of external switches. Alternative applications include the use of the system controller to switch in various RF filters for reducing harmonic distortion.

For more information on system controllers, please refer to Application Note: SC1000 System Controller Used for Automating Radiated Immunity Testing

model description
AD1001 Adapter waveguide to coax N (F) Side Launch, 7.5 - 18 GHz
AD1100 Adapter waveguide to coax for use with ATH2G8 antenna and 500T2z5G7z5 7/16 DIN (F), 2.5 - 7.5 GHz
AD1106 Adapter waveguide to coax for use with ATH2G8 antenna and 300T2z5G7z5 Type N(F), 2.5 - 7.5 GHz
AF06250 Fixed Attenuator, 6dB / 250 Watt
AF06250 Fixed Attenuator, 6dB / 250 Watt
AF06250 Fixed Attenuator, 6dB / 250 Watt
AF10050 Fixed Attenuator, 10dB / 50 Watt
CD20016 Coupling / Decoupling Network for 2 Supply Lines, 16A
CD30016 Coupling / Decoupling Network for 3 Supply Lines, 16A
CDN AF2 Coupling / Decoupling Network for 2 Unscreened non-balanced lines
TK1000 Conducted Immunity Test Kit for IEC Testing (Includes all attenuators, injection and monitor probes, calibration fixtures, calibration and termination resistors necessary to perform Bulk Current Injection testing to IEC specifications
TK1001 Conducted Immunity Test Kit for IEC Testing (Includes all attenuators, injection and monitor probes, calibration fixtures, calibration and termination resistors necessary to perform Bulk Current Injection testing to IEC specifications
TK1002 Conducted Immunity Test Kit for IEC Testing (Includes all attenuators, injection and monitor probes, calibration fixtures, calibration and termination resistors necessary to perform Bulk Current Injection testing to IEC specifications
TK2000 Conducted Immunity Test Kit for MIL / DO160 Testing (Includes all attenuators, injection and monitor probes, calibration fixtures, calibration and termination resistors necessary to perform Bulk Current Injection testing to Military and Avionics specifications
TK3000 Conducted Immunity Test Kit for Automotive Testing (Includes all attenuators, injection and monitor probes, calibration fixtures, calibration and termination resistors necessary to perform Bulk Current Injection testing to Automotive specifications
TL501000 Terminating Load, 1000 Watt, 0.8 - 4.2 GHz (for model 700S1G4A)
TL502000 Terminating Load, 2000 Watt, 0.8 - 4.2 GHz (for model 1000S1G4)