| SC2000 |
RF switch control platform base unit. |
login
|
| SCP2000 |
The SCP2000 module slots are populated to provide drop-in replacement of the Model SC1000 and any of its associated modifications (M1–M5). |
login
|
| SCP2000M1 |
Controller designed for multi-amplifier/multi-load applications with forward and reverse power measurement and emissions feedback. |
login
|
| SCP2000M2 |
Controller accommodates forward power measurement and higher power/higher frequency amplifier and load combinations where switching and cable losses need to be minimized. |
login
|
| SCP2000M3 |
Controller accommodates forward and reverse power measurement and higher power/higher frequency amplifier and load combinations where switching and cable losses need to be minimized. |
login
|
| SCP2000M4 |
Controller accommodates forward and reverse power measurement and higher power/higher frequency (up to 40 GHz) amplifier and load combinations where switching and cable losses need to be minimized. |
login
|
| SCP2000M5 |
Controller accommodates forward and reverse power measurement, higher power/higher frequency amplifier and load combinations where switching and cable losses need to be minimized, and emissions feedback. |
login
|
| SCX2000 |
RF switch control platform expansion unit. The SCX2000 does not have a control panel or remote
control ports and therefore must be connected to a Model SC2000 for local or remote control. The SCX2000 has five (5) user configurable module slots on the rear panel. |
login
|
