AR Corporate Site menu bullet RF Microwave Instrumentation menu bullet Modular RF menu bullet Receiver Systems menu bullet AR Europe     
Menu
“W” Series RF Amplifiers (/images/strips/strip-W-series.jpg)


1-6 GHz Highlights


New 80 to 1000 MHz, Class A
“W” Series Solid State Amplifiers

Our enhanced "W" Series solid state RF amplifiers continue to deliver the performance customers demand. Linear Class A output power over the entire instantaneous frequency range, great harmonic rejection, and the best gain flatness and noise figure in the industry. These are all key features, but the ability to operate without foldback into poorly matched loads is paramount in most Radiated Immunity applications.

They're also extremely energy-efficient and have lower acoustic noise than our competition and previous versions which saves on both your wallet and your hearing. They are also much smaller and lighter which enables you to place them in size-constrained areas. These features along with our new easy-to-use touch-screen panels and numerous control interfaces makes your choice simple. And as always, AR provides the best service and support in the industry. It just doesn't get any better than that.

250W1000 250W1000B
250 Watts CW, 80 - 1000 MHz
The Model 250W1000B is a portable, selfcontained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. The Model 250W1000B, when used with a sweep generator, will provide a minimum of 250 watts of RF power.
Download the Spec Sheet

500W1000 500W1000B
500 Watts CW, 80 - 1000 MHz

The Model 500W1000B is a self-contained, air -cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. The Model 500W1000B, when used with an RF sweep generator, will provide a minimum of 500 watts of swept power.
Download the Spec Sheet

1000W1000 1000W1000E
1000 Watts, 80 - 1000 MHz

The Model 1000W1000E is a self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. The Model 1000W1000E, when used with an RF sweep generator, will provide a minimum of 1000 watts of swept power..
Download the Spec Sheet

2000W1000C 1500W1000
1500 Watt CW, 80 - 1000 MHz

The Model 1500W1000 is a self-contained, air -cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. The Model 1500W1000, when used with an RF sweep generator, will provide a minimum of 1500 watts of RF power.
Download the Spec Sheet

2000W1000C 2000W1000C
2000 Watts CW, 80 - 1000 MHz

The Model 2000W1000C is a self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. The Model 2000W1000C, when used with an RF sweep generator, will provide a minimum of 2000 watts of RF power.
Download the Spec Sheet

Call Me

<< Back to Home