50S1G6

50 Watts CW, 1 GHz - 6 GHz

Login to see pricing information.

The Model 50S1G6 is a solid state, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Housed in a stylish contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack mounting.

The 50S1G6, when used with a sweep generator, will provide a minimum of 50 watts of RF power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The 50S1G6 is protected from RF input overdrive by an RF input leveling circuit wh ich controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. The RF am plifier stages are protected from over-temperature by removing the DC voltage to them if an over-temperature condition occurs due to coo ling blockage or fan failure. Ther e is a digital display on the front panel to indicate the operate status and fault conditions if an over-temperature or power supply fault has occurred. The unit can be returned to operate when the condition has been cleared. All amplifier control functions and status indications are available remotely in GPIB/IEEE-488 format, RS- 232 hardwire and fiber optic, USB, and Ethernet. The bus interface connector is located on the back panel and positi ve control of local or remote operation is assured by a Local/Remote switch on the front panel of the amplifier.